Full Range Audio Systems


Crown Introduces XTI6000
Continuing A Heritage Of
Leading Amplifiers For Portable PA Applications

Crown XTI6000

EXCLUSIVE TO DYNACOUSTICS!

Reprising the broad market success of its XTI Series of portable sound amplifiers for live sound and fixed applications. Crown Audio is introducing the next generation XTI6000 that features advanced power performance, improved system reliability, and a new breakthrough user interface for configuration and control in Crown’s HiQnet™ Band Manager™.

The Crown XTI Series has earned a formidable reputation in the portable sound market place, leveraging Crown’s unparalleled heritage in live sound amplification. The new XTI6000 provides audio professionals with the winning addition of a power amplifier solution to this high value, high performance product line.

“The best just got better with the XTI6000. We’ve listed carefully to the needs and suggestions of end users and retail partners before we built a compelling new amplifier that packs tremendous punch, performs consistently, and is priced to reach the broadest possible market,” stated Andy Flint, Crown marketing manager for portable PA.

The XTI6000 allows for plug and play usability with it’s integrated proprietary DSP with LCD front panel making it easy to set crossovers, delay, limiters, and EQ along with the ability to save and recall up to 20 presets.

Continuing the heritage of previous XTI-Series amplifiers the XTI6000 features an LCD screen with speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Additionally, there is switch-mode universal power supply, useful function indicators, propositional-speed fan-assisted cooling, XLR inputs, Speakon® and binding-post outputs, and short-circuit protection.

Crown XTI6000

Minimum Guaranteed Power, 1 kHz
Per channel, both channels driven
XTi 6000
Stereo, 2 ohms (per ch.)
3000W
Stereo, 4 ohms (per ch.)
2100W
Stereo, 8 ohms (per ch.)
1200W
Bridge-Mono, 4 ohms
6000W
Bridge-Mono, 8 ohms
4200W

The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. All are rugged and lightweight, and offer unmatched value in their class.

  • Integrated proprietary DSP with LCD front panel display
  • Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
  • Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
  • Extremely versatile, handling a wide range of speaker impedances and outputs
  • Switch-mode universal power supply
  • Speaker presets for crossover frequencies, EQ, limiting, and delay
  • Speakon® and binding post outputs, XLR inputs and loop-thrus
  • Comprehensive LED status per channel
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Specifications:
Sensitivity (volts RMS) for full rated power at 4 ohms
1.4V
Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz)
+0/–1 dB
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted
100 dB
Damping Factor (8 ohm): 20 Hz to 400 Hz
> 500
Input Stage
Input is electronically balanced and employs
precision 1% resistors.
AC Line Current
At idle: Draws no more than 90 watts.
Crosstalk (below rated power) 20 Hz to 1 kHz
> 70 dB
Input Impedance (nominal)
20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Stereo
Bridge mono

2-8 ohms
4-16 ohms
Voltage Gain (at 1 kHz, 8 ohm rated output)
37.1 dB
Maximum Input Signal
+22 dBu typical
Operating Temperature
0° C to 40° C at 95% relative humidity
(non-condensing)
AC Line Voltage and Frequency Configurations Available (± 10%)
100V, 120V, 220-240V 50/60 Hz
Ventilation
Flow-through ventilation from front to back
Cooling
Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface)
EIA Standard 19 in. W (EIA RS-310-B)x 3.5 in.
(8.9cm) H x 16.2 in. (41.15cm) D
Net Weight, Shipping Weight
24 lb (10.9 kg), 30 lb (13.6 kg)
RETURN TO TOP OF PAGE

RETURN TO THE MAIN PRODUCTS PAGE